Cloud Connected ECG Wearable using NXP’s Single Chip Module

SCM V-Link technology is ideal for handheld/space-constrained applications allowing customers to integrate vertically.

Powered By

nxp

  • AFIB detection with diagnosis and report to Cloud via Wi-Fi.
  • Top board contains: Wi-Fi/BT module (802.11 b/g/n), NXP 6-axis sensor and SPI NOR Flash 1 GB.
  • Base SCM device: 15.5×15.5mm.
  • Cloud-Connected ECG
  • Battery Operated
  • IoT Medical ECG Alert
  • Life Saving Monitoring
  • Linux Based Platform Providing Extensibility

Celeritas i.MX8X System on Module (SOM)

FirstView follows up on the success of i.MX6 Series SOM offering with a rugged, reliable and low cost i.MX8X Version.  The FVC-MX8X-SOM is an embedded single board module optimized for performance and power with a life cycle that removes concerns for obsolescence. The board is designed to be paired with a custom carrier board to fit specific applications in a wide range of environments.

Powered By

200px-Freescale_Semiconductor_logo.svg

android-logo

Linux_logo

  • Arm® Core 4 X Cortex-A35, 1 X Cortex-M4F
  • DSP Core Tensilica® HiFi 4 DSP
  • DRAM 8GB DDR3L Memory, 933MHz
  • eMMC 4GB or 8GB ver 5.0 (HS400)
  • GPU 1 x GC7000Lite Performance Optimized
  • VPU 4K h.265 dec, 1080p h.264 enc/dec
  • Ethernet 2 x Gigabit with AVB
  • Wi-Fi/BT Module SX-SDMAC-2832S+
  • USB with PHY 1 x USB 3.0 (can be used as USB 2.0)
  • 1 x USB 2.0
  • Ethernet 1
  • Size 85X 85mm
  • Temperature -40° to +125° C

Target Application 4 Target Application 3 Target Application 2 Target Application 1

  • Automotive—instrumentation, infotainment, display audio, smart antenna, Vehicle-to-Vehicle (V2X), gateway and camera systems.
  • Avionic/Industrial—avionics cockpit display, in-flight entertainment
  • Advanced Human Machine Interface-HMI
  • Robotics—drone, mobile service robot
  • Building Control—fire and security panel, elevator control, HVAC control
  • Healthcare – Patient Monitoring
  • Networking
  • General purpose HMI
Block Diagram        Board Front        Board Back

i.MX 6 Series ARM Cortex-A9 System on Module (SOM)

The SOM is an embedded single board module designed to be reliable, rugged, and low cost. The board is designed to be paired with a custom carrier board to fit specific applications in a wide range of environments.

Powered By

200px-Freescale_Semiconductor_logo.svg

android-logo

Linux_logoWindows-embedded-compact_logo

  • i.MX 6Solo, 6DualLite, 6Dual, 6Quad (800 MHz DualLite default) processor options
  • Automotive grade processor and components for harsh high temperature environments
  • Multiple boot options; SPI NOR, eMMC, or Micro SD
  • Full standalone operation. All needed connections for operation are on the board. Standalone items to be unpopulated for production to reduce manufacturing cost.
  • Debug board interface for ease of development
  • Keyed edge connector and multiple mechanical mounting holes for secure installation in harsh environments
  • Freescale i.MX 6 Series ARM Cortex-A9 Processor
  • Single 4.5V to 12VDC Supply Voltage
  • 1GB DDR3 (expandable to 4GB)
  • SPI NOR, eMMC, MicroSD
  • 10/100/1000 Ethernet
  • USB 2.0 Host and OTG
  • SATA, PCIe, LVDs, FlexCAN, HDMI, I2C, SPI, CAN,
    RGB, Audio, UARTs, JTAG
  • Edge Connector (MXM)
  • 3.35 x 3.35 inches (85 x 85 mm)
  • -40 to +85°C operational range
  • Android and Linux Compatible

System on Module Carrier Board

The FirstView SOM Carrier Board is a companion board to the FirstView SOM designed to speed up development of hardware and software. The carrier allows the developer to test multiple peripherals with network connectivity and user interfaces.

Powered By

200px-Freescale_Semiconductor_logo.svg

android-logo

Linux_logoWindows-embedded-compact_logo

  • Provides all necessary connections for Bluetooth (CSR8311A08), WiFi (CSR6030), and GPS (UBX- G7020) including on board ceramic antennas for each IC
  • UART to USB converter for the i.MX6 debug console port
  • 4-port USB 3.0 chip (TUSB7430) with all necessary components
  • Supports LCD, via LVDS, with resistance touch screen. All necessary backlight and LCD gamma voltages are generated.
  • A NXP UDA1334ATS provides an audio out option. The electronics can directly drive headphones or can be used as an input to power speakers.
  • FirstView SOM Interface
  • 10 to 24VDC Supply Voltage
  • Bluetooth, WiFi, and GPS
  • USB 2.0 Host x1, 3.0 Host x 4, OTG x1
  • 10/100/1000 Ethernet
  • Analog Camera Interface
  • LCD Interface with Touchscreen
  • CAN Interface
  • Console Debug Port (USB)
  • User Defined Switches
  • Audio Out and Microphone In
  • 5 x 7.6 inches (127 x 193 mm)

PRODUCT SHOWCASE